Hello, welcome to visit Jiangsu Jianye Chemical Equipment Co., Ltd. official website!

低温储罐厂家png 低温储罐厂家


Cryogenic tank manufacturer


Contact us

Name: Jiangsu Jianye Chemical Equipment Co., Ltd.

Contact: Liu Yong





Address: Sanjiali Road, Nansha, Jingang Town, Zhangjiagang City


LNG gasification station

Your current position: Home page >> Products >> Gasification station

LNG gasification station

  • Taxonomy:Gasification station

  • Click times:
  • Date of release:2018/08/16
  • Online inquiry
Detailed introduction

LNG gasification station

LNG gasification station

The LNG gasification station can be divided into a single point direct supply gasification station and an LNG satellite station according to the supply target, to receive, store and gasify the upstream purchased LNG to supply gas to the local. The LNG gasification station can be regarded as a small LNG receiving station, and some gasification stations are also equipped with a liquefaction device.

LNG gasification station unloading process:

LNG is transported from the LNG liquefaction plant to the LNG gasification station in the gas city by road tanker or tank container truck, and the tank tank is boosted by the air temperature booster gasifier on the tanker (or through the unloading station set in the station) The pressurized gasifier boosts the tank container truck to form a certain pressure difference between the tank truck and the LNG storage tank, and the pressure difference is used to discharge the LNG in the tank truck into the gasification station storage tank. At the end of the unloading, the gas phase natural gas in the tank truck is recovered through the unloading station gas phase pipeline.

When unloading the truck, in order to prevent the pressure in the LNG storage tank from rising, the speed of unloading is affected. When the temperature of the LNG in the tanker is lower than the temperature of the LNG in the tank, the upper inlet method is adopted. The low-temperature LNG in the tank truck enters the storage tank through the inlet pipe nozzle on the storage tank, and cools part of the gas into a liquid to reduce the pressure inside the tank, so that the unloading can be smoothly carried out. If the LNG temperature in the tank car is higher than the temperature of the LNG in the tank, the lower liquid inlet method is adopted, and the high temperature LNG enters the storage tank from the lower inlet port, and is mixed with the low temperature LNG in the tank to cool down, thereby avoiding the high temperature LNG from the upper inlet port. Evaporation into the tank and increased pressure in the tank make it difficult to unload the truck. In actual operation, since the current LNG gas source is far away from the gas city, when the long-distance transportation reaches the gas city, the LNG temperature in the tanker is usually higher than the temperature of the LNG in the gasification tank, and only the lower liquid can be used. the way. Therefore, in addition to the use of the upper liquid filling method when filling the LNG for the first time, the normal unloading method basically adopts the lower liquid feeding mode.

In order to prevent the sudden temperature change during unloading, the large temperature difference stress damages the pipeline or affects the unloading speed. Before each unloading, the unloading pipeline should be pre-cooled with LNG in the storage tank. At the same time, it should be prevented from opening or closing the valve quickly so that the flow rate of the LNG suddenly changes to cause the liquid hammer to damage the pipeline.

The address of this article:http://en.jylng.cn/product/611.html

Recently browse:

Please leave a message for us
Please input the message here, and we will contact you as soon as possible.